• The XM95 card reader connects to your computer and works as a keyboard wedge.

• This simply means that when a card is swiped, the data on the card is translated through your keyboard into computer readable text and symbols.

• By default, the XM95 card reader is configured to work with U.S. / English keyboards.

• If you use a non-English keyboard, a quick utility program can be downloaded and the setting on the device can be changed to match your keyboard.

Installing and Configuring the Device

1) First, make sure the XM95 card reader is connected to the computer.

2) Download the XM95_Config_Utility.zip file found here.

3) Once downloaded, locate the folder and use the 'Extract All' option to extract the files to a folder on your desktop.

4) Open the resulting new folder and locate the 'Setup.exe' file. Double click to run the file.

5) The installation wizard will open. Work your way through the setup screens making the selections shown below.

6) Once computer reboot is complete, locate the new MagSwipe folder and double click 'MagSwipe Configuration Utility' to make changes to the device.

7) Select 'Change Basic Reader Settings'.

8) Select the 'Keyboard Settings' tab. Select the language of your keyboard, then 'Send to MSR'. This will send the new setting to your connected device. The card reader will beep when the change is made.

9) Confirmation is shown on screen that the setting change is complete. Close and exit the utility.